Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Why Everett Homeowners Choose Lennox Air Duct Cleaning
Duct Cleaning Everett provides independent Lennox air duct cleaning, repair, and service in Everett, WA. We’re not authorized or partnered with Lennox – we’re a specialty shop that has cleaned and sealed enough Lennox systems to know how their ducting is laid out and how it fails in this climate. What makes our Lennox work different is the equipment: camera-verified cleaning, HEPA-rated negative-pressure containment, and the repair capability to fix what the cleaning exposes. Call (833) 991-7936 for a free estimate.
Everett’s Lennox systems fail differently than Lennox systems in Phoenix or Denver. Our wet marine climate pushes over 30 inches of rain a year, and the damp crawlspaces under so many of this city’s postwar homes give that moisture somewhere to collect. Ductwork that stays sealed in a dry market pulls crawlspace air here.
Key Takeaways
- Independent Lennox service: cleaning, video inspection, and metal duct repair under one roof.
- Vetted through camera inspection, not taken on faith. You see the before and after.
- Nikro HEPA vacuum equipment with commercial-grade containment, not consumer suction.
- We repair what others walk past: separated plenums, collapsed flex, failed connections.
Why Trust Duct Cleaning Everett for Your Lennox Air Duct Cleaning?
Trust in duct work comes down to two questions: does the crew know your system, and can they prove what they did? On a Lennox, the answer starts with familiarity. Merit Series gas furnaces, Elite Series furnaces and air handlers, the Dave Lennox Signature Collection, and Healthy Climate filter cabinets each have their own duct and plenum layouts. The return-side connection on a Merit furnace is not built the same way as the plenum on an Elite air handler. A crew that treats them identically is guessing.
We install quality parts that fit Lennox equipment, from OEM-compatible filters and Healthy Climate media when the cabinet calls for it, to aftermarket flex, mastic, and sealing products for repairs. We don’t stock genuine Lennox parts, and we don’t claim factory authorization. What we do claim is warranty-safe work: cleaning, sealing, and repair that doesn’t interfere with manufacturer coverage because it stays within the duct system rather than modifying the equipment.
Fourteen years of duct-focused work has shaped how we think about it. The company’s approach: negative-pressure extraction, proper agitation, camera verification, and no shortcuts. ” That’s the standard we hold on every Lennox job in Everett.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Fix in Everett
Lennox equipment is solid. The ducting connected to it is where the trouble usually lives. Here are the problems we run into most often in this city, and why they happen here.
- Taped return connections pulling crawlspace air. Return ducting on Merit and Elite furnaces is often connected to the plenum with tape rather than mastic. Tape dries out, peels, and lets the system draw garage and crawlspace air straight back into circulation. In Everett’s damp climate, that air carries moisture and whatever’s growing in the crawlspace. The fix is mastic sealing at the joint, which holds through the seasonal swings tape can’t handle.
- Healthy Climate filter cabinets choking airflow. Older Lennox systems with 4-inch media filter cabinets load up fast when a homeowner swaps in a mismatched filter. The cabinet wants a specific size and depth; a wrong filter gets bypassed and clogs, so the cabinet itself becomes the restriction. Airflow drops, the return side collects buildup, and the coil starts icing. Match the filter to the cabinet and the system breathes again.
- Kinked flex at tight bends on Elite and Signature air handlers. Flexible duct runs that make sharp turns collapse at the bend. A collapsed run starves the room it feeds, and the restriction pulls lint and debris forward into the evaporator coil. Rigid metal transitions at the bends solve the problem that replacement flex of the same type would recreate.
- Degraded foil-faced flex at Lennox plenum collars. Everett’s damp crawlspaces do a number on foil-faced flex where it meets the plenum collar. The foil degrades, fiberglass sheds, and moisture feeds microbial growth on the coil above. The duct is failing at the one place it needs to stay sealed.
- Disconnected joints in older homes serving Lennox equipment. In crawl-space homes around Bayside and Pinehurst, duct runs often have joints that have separated entirely. Soil, pest droppings, and moisture find their way in. Techs commonly find rodent nests and mold on the same job, and a cleaning without fixing the breach just reopens the door.
One recent example stays with us. We responded to a 1990s Everett rambler with a Lennox Merit Series furnace. The homeowner complained of dust and a musty smell whenever the heat kicked on. Video inspection showed the return trunk had separated from the plenum behind a taped joint, and the flex runs to two bedrooms were collapsed at the bends, pulling crawlspace air and fiberglass into the system. We mastic-sealed the plenum connection, rebuilt the failed flex with rigid metal transitions, cleaned the supply and return runs, and the static pressure dropped enough that the furnace stopped short-cycling. Same furnace. Different duct system.
Lennox Parts & Our Repair-vs-Replace Approach
Parts decisions on a Lennox depend on what the system needs. We use OEM Lennox-compatible filters and Healthy Climate media when the cabinet calls for them. For duct work, we use quality aftermarket flex, mastic, and sealing products that meet the same standard as what the equipment was built around. We don’t stock genuine Lennox parts, and we’re clear about that up front. What we buy, we buy to fit the equipment you have.
Repair versus replace is a judgment call, and we make it honestly. If a Lennox heat exchanger or coil is cracked or badly fouled, cleaning buys time at best. We tell homeowners plainly when that’s the case and when replacement is the honest move. Duct-side problems – separated plenums, collapsed flex, failed connections – are almost always repairable, and repairing them is far cheaper than tearing into equipment that’s still doing its job. If you want an honest read on your Lennox system, call (833) 991-7936. Estimates are free.
Our Lennox Service Process – Step by Step
Every Lennox job follows the same four-step process. No surprises about what we found, what we’re doing, or what it costs.
- 1
Diagnosis and video inspection. We run a Rotobrush camera through the return and supply runs to see what’s actually there. On Lennox systems, we pay particular attention to plenum connections, flex-to-collar joints, and any Healthy Climate filter cabinet in the path. What we find shapes what we quote.
- 2
Repair, install, and sealing. If the inspection turned up a separated joint, collapsed flex, or degraded collar, we repair it before cleaning. Mastic-sealing return plenum connections, rebuilding failed flex with rigid metal transitions, and correcting filter cabinet mismatches all happen here. Cleaning a system with open breaches just redistributes the problem.
- 3
Cleaning with containment and verification. Nikro HEPA-rated vacuum equipment pulls negative pressure on the system while we agitate the duct walls with Rotobrush equipment. Dislodged debris goes into containment, not back into the room or your coil. When we’re done, we run the camera again and show you the difference on screen. Camera-verified clean, not a verbal claim.
- 4
Warranty-safe closeout. We leave the system with no modifications to Lennox equipment itself, which keeps manufacturer coverage untouched. You get before-and-after photos of your own ducts, an explanation of what we sealed and why, and clear notes on any filter size the cabinet actually wants.
See the difference
Before
After
Before
After
Before
AfterLennox Products We Service & Install in Everett
We work on the duct systems and air quality equipment attached to Lennox residential systems: Merit Series gas furnaces, Elite Series furnaces and air handlers, Dave Lennox Signature Collection SL280 and SL297 furnaces and XC/XC21 air conditioners, and Healthy Climate whole-home air cleaners and media filters. On the duct side, that means supply and return cleaning, video inspection, metal duct repair, flex-to-rigid transitions, and mastic sealing at every plenum connection we can reach. On the air-quality side, we install Healthy Climate media filters matched to the cabinet that holds them. For filtration upgrades post-cleaning, we also work with Honeywell, Aprilaire, and Guardsman components when a Lennox cabinet isn’t the right fit for a system. If it moves air through a Lennox home in Everett, we can take a look at it.
We Also Service These Brands
Plenty of Everett homes have a mix: Lennox furnace, different brand air handler, another brand entirely on the filter cabinet. Being a single-brand shop would leave parts of those systems untouched. We service Trane and Carrier equipment alongside Lennox, using the same cleaning, inspection, and repair process across all three. If your Lennox system shares a house with another brand, one call covers the whole duct network.
FAQs – Lennox Air Duct Cleaning Service in Everett
No. We’re an independent service provider, not authorized, certified, or partnered with Lennox. We work on Lennox systems because we’ve done it long enough to know the equipment, not because the manufacturer has endorsed us. Call (833) 991-7936 if you want the work done by a crew that knows the difference and states it plainly.
Yes. We use OEM Lennox-compatible filters and Healthy Climate media where the cabinet calls for it, and quality aftermarket flex, mastic, and sealing products for duct repairs. We don’t stock genuine Lennox parts and won’t pretend otherwise. Call (833) 991-7936 to talk through what your system needs.
Most Lennox duct cleanings in Everett take a few hours, depending on system size and how many runs need work. Repairs add time: a separated plenum or collapsed flex that needs rebuilding with rigid metal transitions can add another couple of hours. You’ll get a time estimate with the written quote, before any work starts.
We cover the duct systems and air quality equipment tied to Merit Series gas furnaces, Elite Series furnaces and air handlers, the Dave Lennox Signature Collection (SL280/SL297 furnaces, XC/XC21 air conditioners), and Healthy Climate air cleaners and media filters. We clean and repair supply and return ductwork, seal plenum connections, and correct flex routing. Call (833) 991-7936 to confirm your setup.
Our duct cleaning and duct repair work stays within the duct system and doesn’t modify your Lennox equipment, so manufacturer coverage isn’t affected by it. We’re careful about that on every job. If the inspection turns up a heat exchanger or coil problem that falls under warranty, we tell you plainly so you can take it up with the manufacturer. Call (833) 991-7936 if you have warranty concerns.
It depends on the system, not on the brand name. A standard whole-home Lennox duct clean runs a few hundred dollars; add repairs for separated plenums or collapsed flex and the total goes up. We set one flat price per system after the video inspection, in writing, before work starts. Call (833) 991-7936 for a free estimate – you’ll know the number before we pull the van in.
Book Your Lennox Service in Everett, WA
If you’re ready to see what’s actually inside your Lennox duct system – and get it cleaned, inspected, and repaired by a crew that does all three – call (833) 991-7936. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the price is set per system in writing before work starts.
Written by the team at Duct Cleaning Everett.